Categories

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
£42.36  

Blueberry Home Solutions Smart Hub for Raspberry Pi - Blueberry TXRXTempHum, The Blueberry wireless temperature and humidity sensor features an on-board ATMEGA329P microcontroller(MCU) giving it all the programmability and convenience of an Arduino. There is a dedicated showerproof ABS case (75-0604) for this board together with a PP3 battery. By using the sleep functions of the RFM21B sensor and ATMEGA328P, a PP3 battery will allow the board to transmit for up to a year. The transmission range is up to 300m and the data rate is up to 115k bits per second using a Hope RFM21B tranceiver module. The transmission protocol supports 250 different network groups with 30 nodes per network; by using the MCU this can be greatly extended. The wireless frequency is set to 868MHz for use in Europe, by default. Settings are available for other regions around the world.The ATMEGA328P is the same processor used on the Arduino UNO and this board can be programmed in the same way using either the Arduino IDE or your own preferred tool chain. Briefly, the MCU has 32Kbytes of flash memory, 1Kbyte of EEPROM, 2Kbyte RAM, 23-GPIO lines, 3 timers, 6 x 10-bit A/D channels. This programmability allows you to add additional sensors or to control other devices, greatly extending the usefulness of this clever little board.This module is compatible with the Blueberry 4-character 14-segment alphanumeric display (75-0602), simply plug the two together, apply power (from a PP3 battery for example) and the display will show the temperature and humidity being updated at regular intervals. Communicate wirelessly with the Blueberry Internet of Things Controller (75-0600) which also has an 868MHz transceiver and because each sensor has a unique ID, multiple sensors can be linked to the same controller. 868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity Sensor

Check stock and price


Save to favourites

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...

Most popular Computers in Blueberry

'868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...' is from the Computers category
DS18B20 Temperature Sensor with Pipe Clamp Assembly
DS18B20 Temperature Sensor with Pipe Clamp Assembly
£7.20
Raspberry Pi Multi-Purpose IoT Controller Board
Raspberry Pi Multi-Purpose IoT Controller Board
£126.00
Alphanumeric 14 Segment Blue Display with I2C
Alphanumeric 14 Segment Blue Display with I2C
£23.94
868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
£42.36
TXRX ABS Case for 75-0603 Transmitter / Receiver
TXRX ABS Case for 75-0603 Transmitter / Receiver
£5.59
I2C Cable 15cm
I2C Cable 15cm
£3.18
DS18B20 Temperature Sensor with 22mm Pipe Clamp Assembly
DS18B20 Temperature Sensor with 22mm Pipe Clamp Assembly
£7.20

Most popular Computers

Most popular Blueberry

'868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...' is made by Blueberry
DS18B20 Temperature Sensor with Pipe Clamp Assembly
DS18B20 Temperature Sensor with Pipe Clamp Assembly
£7.20
Raspberry Pi Multi-Purpose IoT Controller Board
Raspberry Pi Multi-Purpose IoT Controller Board
£126.00
Alphanumeric 14 Segment Blue Display with I2C
Alphanumeric 14 Segment Blue Display with I2C
£23.94
868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
£42.36
TXRX ABS Case for 75-0603 Transmitter / Receiver
TXRX ABS Case for 75-0603 Transmitter / Receiver
£5.59
I2C Cable 15cm
I2C Cable 15cm
£3.18
DS18B20 Temperature Sensor with 22mm Pipe Clamp Assembly
DS18B20 Temperature Sensor with 22mm Pipe Clamp Assembly
£7.20

Most popular Blueberry

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ... on other UK sites

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ...
£42.36
Blueberry Home Solutions Smart Hub for Raspberry Pi - Blueberry TXRXTempHum, The Blueberry wireless temperature and humidity sensor features an on-board ATMEGA329P microcontroller(MCU) giving it all the programmability and convenience of an Arduino. There is a dedicated showerproof ABS case (75-0604) for this board together with a PP3 battery. By using the sleep functions of the RFM21B sensor and 
APC Temperature and Humidity Sensor
£95.38
APC sets the standard in its industry for quality, innovation and support. Its comprehensive solutions, which are designed for both home and corporate environments, improve the manageability, availability and performance of sensitive electronic, network, communications and industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, and performance of 
Machine Mart Xtra Draper Digital Temperature & Humidity Meter
£37.00
This Draper Digital Temperature & Humidity Meter is a compact easy to use multi-functional meter. It produces rapid accurate readings for temperature (-10 to 50 degree Celsius) and humidity (10% to 99%), and comes fitted with a 37mm backlit LCD screen and is powered by a 9V PP3 battery (sold separately). It is ideal for environmental monitoring, health and safety checks and a host of other 

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ... on other UK sites

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ... on USA sites

Atomic LCD Wall Clock with Temperature Date Humidity T-4680
$38.99
This clock is synchronized with the cesium fountain clock in Fort Collins, Colorado. This super accurate "atomic" clock sets itself automatically so you never have to. Adjusts for daylight savings time Displays Temperature, Humidity, Day and Date Includes: One (1) alarm clock Dimensions: 10 inches high x 12 inches wide x 2 inches deep Type: Atomic Material: Plastic  
R-Zilla Humidity & Temperature Gauge
$12.99
R-Zilla Humidity & Temperature Gauge is an ideal choice for entry-level terrarium owners who want to monitor humidity and temperature, the two critical factors in reptile activity, disease resistance and breeding success. Traditional needle gauges display relative humidity from 0-100%, temperatures in a range from 60-120F (16-49C). The bright, easy-to-read dial mounts in seconds on the back wall 

868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ... on USA sites

Brands

Thank you for visiting 868 MHz Transmitter/ Receiver with SHT21 Temperature and Humidity ... on shoppingfind.co.uk

We bring the products from many websites to one website for you to search, save and compare.